- 5,311
- 9,770
I’m new to Sole Sauce, will it ruin the toe cap (turn to white instead off of-white) or turn the soles blue on my Maroon 6s? Thank you for your time.
:::OFFICIAL SNEAKER CARE/MAINTENANCE POST::: (It's back!)
- Thread in 'Jordan Brand' Thread starter Started by blazers21ntnp,
- Start date
- 249
- 365
Good point, but after only one time wearing them?
- 3,084
- 5,865
The Nike Air on my (toddler 10c) kid's 3s was loose in the box when they came in the mail
- 249
- 365
The Nike Air on my (toddler 10c) kid's 3s was loose in the box when they came in the mail
That's quality craftsmanship for you.
- 8,094
- 5,350
It should just reverse the oxidation but if it’s paint it may harm or discolor it.
- 572
- 629
Anyone else work on OG Shadow 10's? So many factories with a ton of variations in aging, including a variety of spots depending on the pair (DS). Suggestions?
- 4,318
- 7,446
There's a few really good facebook groups that work on OGs, I'll find the names for you in a few.Anyone else work on OG Shadow 10's? So many factories with a ton of variations in aging, including a variety of spots depending on the pair (DS). Suggestions?
- 572
- 629
THANK YOU!! Much appreciated.
- 4,318
- 7,446
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
Three different groups
- 6,190
- 4,274
Hey guys so my collection is growing old. Just wore the Chicago 10s from 2011 and they separated. I’d like to try and repair them myself since I think I’ll be doing other pairs. Is there a good kit that I can put together for myself? Also I’m assuming I use barge cement? I guess a good question would be what dremel bit to use on what material? I was watching a video where the guy says to use a metal bit on the 11 clear sole because if the texture. But if there’s a good video with info for a beginner I would love to watch it
Looks like a pretty strait forward job.
Looks like a pretty strait forward job.
Last edited:
- 8,094
- 5,350
It’s very straight forward. Use a metal dremel bit but be easy and remove just the glue if possible. Barge cement infinity in the green can is the one you want. Place on both sides, let sit for 8 minutes, and then place together and then hold for 24 hours using painters tape and towels to keep pressure all over. Also, stuff the uppers before taping down.
- 2,139
- 3,595
Any tips on how to make the netting on Black Metallic 5s icy again?
- 928
- 1,081
Any ideas how to remove the stains/bleeding on the TPU heel cup?
- 1,641
- 3,735
raptorsundefeated
Mr clean magic eraser?
- 37,827
- 15,636
Anybody know a reliable site to get AJ 3,7, and 12 replacement back tabs/tabs? I had a few marked, but they seem defunct now.
KanyIZZY
formerly j o 19
- 18,649
- 49,468
ISSUE: PL SCRATCHES on AJI
QUESTION:
I need help removing some very minor factory scratches from my top 3 Gold PL AJ1’s. I bought them a half size too small, needed to sell them and stocks rejected them because of a tiny scratch you can barely see.
Sanitizer and petroleum jelly did not work.. I read about nail polish remover but also read that acetone can be harsh on PL so I’m not sure what to use?
QUESTION:
I need help removing some very minor factory scratches from my top 3 Gold PL AJ1’s. I bought them a half size too small, needed to sell them and stocks rejected them because of a tiny scratch you can barely see.
Sanitizer and petroleum jelly did not work.. I read about nail polish remover but also read that acetone can be harsh on PL so I’m not sure what to use?
- 37,827
- 15,636
NEVER use acetone on PL unless you're stripping the layer to repaint it or restore faded colors. I'm not sure how to fix PL scratches, if I get up to that stage, I'll let you know if you don't find out before me lol.
- 37,827
- 15,636
On another note... finally getting around to some restorations. I think I had these out of rotation for at least 7 years. More to come....
Mister Meaner
formerly super producer j
- 20,530
- 10,986
Its really a new day now. Happening in the front too.
Tho iirc, this started happening on my Bron 3s as well.
Got some Silver Duncan foams somewhere that need the same treatment. Gotta find them first ofc.
- 13,405
- 11,917
Are 2014 DS 6s safe to un-DS? Want to rock 2014 Sport Blues but I’m afraid of them crumbling.
- 13,221
- 12,505
What’s the best method for ink stain removal from clear outsoles? Damn receipt in the box 
.
.
- 37,827
- 15,636
Should be safe. They won't crumble, they switched the midsoles by 2014, the most you have to deal with is separation if anything.
- 13,405
- 11,917
Much appreciated!
- 150
- 82
- 36
- 25
I am considering ironing the toe on the AMM 4 Violet Ore Colorway to get that AJ4 Sb look. Anyone have any experience with avoiding risk to damaging the shoe ?
