- Aug 26, 2007
- 175
- 10
hey RICO7JT, in regards to help with your sea glow attempts, let me tell you what works for me when i apply it to my xi's...
steps:
1. wash the soles with soap and water before applying any seaglow!!! (use a toothbrush and rag to really scrub the soles and rid them of any excess dirt on thesoles.)
2. get some paper towels and fold them several times to make a pad for the seaglow. Drop a small amount of sea glow on the paper towels. ( several drops or so,enough to spread thinly and evenly on the yellowed areas.
3. Now, really work the seaglow into the soles by spreading the paper towel onto the soles.. (Also, after the paper towel, i use a toothbrush to just spreadthe liquid around and to get it nicely coated on the soles.)
4. MAKE SURE THAT THE SEA GLOW DOESNT RUN ONTO THE PATENT LEATHER AND DRY THERE!!! (this can leave stains if not taken care of within a short period of time.)
5. take the shoes out side and place them under direct sunlight. (dont worry about the temp, it doesnt have to be hot outside to work, its all about the directrays from the sun, so make sure that sunlight is accessbile).
6. Leave them there for 30 min. under the sunlight. You will results at this point!!
7. wait another 30 minutes.
8. Now, go check them out and they should look considerable better!!!
9. you can now repeat the process if you would like to. (not necessary but for some extreme yellowed conditions, this is a good step to take!!)
10. After you are finished, take the shoes inside and wash off the seaglow with soap and water, and scrub them down just like you began in step 1.
11. now you are finished and the soles should look much, much better!!!
good luck and pm me if you have any other questions.
steps:
1. wash the soles with soap and water before applying any seaglow!!! (use a toothbrush and rag to really scrub the soles and rid them of any excess dirt on thesoles.)
2. get some paper towels and fold them several times to make a pad for the seaglow. Drop a small amount of sea glow on the paper towels. ( several drops or so,enough to spread thinly and evenly on the yellowed areas.
3. Now, really work the seaglow into the soles by spreading the paper towel onto the soles.. (Also, after the paper towel, i use a toothbrush to just spreadthe liquid around and to get it nicely coated on the soles.)
4. MAKE SURE THAT THE SEA GLOW DOESNT RUN ONTO THE PATENT LEATHER AND DRY THERE!!! (this can leave stains if not taken care of within a short period of time.)
5. take the shoes out side and place them under direct sunlight. (dont worry about the temp, it doesnt have to be hot outside to work, its all about the directrays from the sun, so make sure that sunlight is accessbile).
6. Leave them there for 30 min. under the sunlight. You will results at this point!!
7. wait another 30 minutes.
8. Now, go check them out and they should look considerable better!!!
9. you can now repeat the process if you would like to. (not necessary but for some extreme yellowed conditions, this is a good step to take!!)
10. After you are finished, take the shoes inside and wash off the seaglow with soap and water, and scrub them down just like you began in step 1.
11. now you are finished and the soles should look much, much better!!!
good luck and pm me if you have any other questions.