Home Buying & Real Estate Thread

ekrev98 ekrev98

what is the average cost to convert one of those fiberglass tub/shower combo to a full tile shower only. doesnt even need to have fancy waterfall feature like that. asking for my parents. maybe you have some associates in norcal you recommend
 
ekrev98 ekrev98

what is the average cost to convert one of those fiberglass tub/shower combo to a full tile shower only. doesnt even need to have fancy waterfall feature like that. asking for my parents. maybe you have some associates in norcal you recommend


As long as you don't move any of the plumbing around it can cost $2500-$3000 to redo an entire bathroom which includes labor and finishes. Obviously the price can go up depending on finishes like marble floorings, type of countertops, faucets, etc...

Unfortunately, I'm based in San Diego so I don't have any contractors in NorCal.
 
ekrev98 ekrev98

what is the average cost to convert one of those fiberglass tub/shower combo to a full tile shower only. doesnt even need to have fancy waterfall feature like that. asking for my parents. maybe you have some associates in norcal you recommend

Tile work alone is probably going to cost $2-2500.
New shower pan $500
Factor in a shower door anywhere from $500 to $2000.
This doesn't include any demo or other factors that popup once work has started.
Once the walls open up you will probably run into issues.
I just pulled a few of those numbers from the contract I had with my General Contractor.
 
ekrev98 ekrev98

what is the average cost to convert one of those fiberglass tub/shower combo to a full tile shower only. doesnt even need to have fancy waterfall feature like that. asking for my parents. maybe you have some associates in norcal you recommend


As long as you don't move any of the plumbing around it can cost $2500-$3000 to redo an entire bathroom which includes labor and finishes. Obviously the price can go up depending on finishes like marble floorings, type of countertops, faucets, etc...

Unfortunately, I'm based in San Diego so I don't have any contractors in NorCal.

Where in SD?

I may be looking for some contractors if I decide to not do the work myself.
 
Last edited:
As long as you don't move any of the plumbing around it can cost $2500-$3000 to redo an entire bathroom which includes labor and finishes. Obviously the price can go up depending on finishes like marble floorings, type of countertops, faucets, etc...

Unfortunately, I'm based in San Diego so I don't have any contractors in NorCal.
Where in SD?

I may be looking for some contractors if I decide to not do the work myself.

Based out of North Park but we work throughout SD. Just IM me if you are interested.

What area are you in?
 
damn it sucks trying to find a nice affordable home in the bay area so damn expensive
i been watching hgtv the past week or so
and been seeing folks buying 5 bedroom 3 bath homes for like 3-400k :{
and they tripping cause the price so high :{
 
Last edited:
damn it sucks trying to find a nice affordable home in the bay area so damn expensive
i been watching hgtv the past week or so
and been seeing folks buying 5 bedroom 3 bath homes for like 3-400k :{
and they tripping cause the price so high :{

You can Get a studio for that price out here.
 
need some help
can i use a fha loan to build a house??????
like I'm reading and its just making my head hurt :lol
can you???
and how does it work 8o
 
need some help
can i use a fha loan to build a house??????
like I'm reading and its just making my head hurt :lol
can you???
and how does it work 8o

You doing a true custom home or a builder?
i have no clue i just want a normal 4 bedroom home built
hoping to get what i want at a SLIGHTLY cheaper price since I'm here in the bay
and just looking for advice or whatever
I'm clueless on this whole home buying building process
and think this might be a better option
 
Last edited:
need some help
can i use a fha loan to build a house??????
like I'm reading and its just making my head hurt :lol
can you???
and how does it work 8o

You doing a true custom home or a builder?
i have no clue i just want a normal 4 bedroom home built
hoping to get what i want at a SLIGHTLY cheaper price since I'm here in the bay
and just looking for advice or whatever
I'm clueless on this whole home buying building process
and think this might be a better option

A true custom home is really expensive so you sound like you want to do a new build through a builder.

Yes you can do FHA for a new build. If you go through builders bank they typically give you extra incentives too. You still have to shop around for the best rates though.
 
need some help
can i use a fha loan to build a house??????
like I'm reading and its just making my head hurt :lol
can you???
and how does it work 8o

You doing a true custom home or a builder?
i have no clue i just want a normal 4 bedroom home built
hoping to get what i want at a SLIGHTLY cheaper price since I'm here in the bay
and just looking for advice or whatever
I'm clueless on this whole home buying building process
and think this might be a better option

A true custom home is really expensive so you sound like you want to do a new build through a builder.

Yes you can do FHA for a new build. If you go through builders bank they typically give you extra incentives too. You still have to shop around for the best rates though.
Repped
Can a realtor help me with that
Or do I have to try to do this alone

Also pics of ur challenger 8o
 
Last edited:
Random question, how much is it to take out a drop ceiling and put in a regular dry wall ceiling?
 
Random question, how much is it to take out a drop ceiling and put in a regular dry wall ceiling?

Where is the soffit?
Kitchen? Living room.
Just did this in my kitchen, 17x20 area:
Demo was a couple hundred + $1750 to raise the ceiling, new drywall, taping, texture and paint.
Ended up costing a lot more when we had to re-route plumbing and vent lines.

This is in San Jose, CA, so depending on where you are prices could be different.
 
Last edited:
Where is the soffit?
Kitchen? Living room.
Just did this in my kitchen, 17x20 area:
Demo was a couple hundred + $1750 to raise the ceiling, new drywall, taping, texture and paint.
Ended up costing a lot more when we had to re-route plumbing and vent lines.

This is in San Jose, CA, so depending on where you are prices could be different.
Yeah, it's in the kitchen and the kitchen is not huge. And the house is in PA so I'm thinking the price might be a little cheaper. There's also a drop ceiling in one of the bedrooms which is probably bigger than the kitchen, so I gotta figure that out too.

Thanks for the estimate though! 
 
need some help
can i use a fha loan to build a house??????
like I'm reading and its just making my head hurt :lol
can you???
and how does it work 8o

maybe...but you are going to have buy the land first, finding a 5K sq ft vacant lot to purchase in the bay.. yeah sounds good :lol

there's gotta be some decent condo's for 4 or less in the bay, maybe even a PUD.

if i still had MLS access i would check.
 
Last edited:
need some help
can i use a fha loan to build a house??????
like I'm reading and its just making my head hurt :lol
can you???
and how does it work 8o

maybe...but you are going to have buy the land first, finding a 5K sq ft vacant lot to purchase in the bay.. yeah sounds good :lol

there's gotta be some decent condo's for 4 or less in the bay, maybe even a PUD.

if i still had MLS access i would check.
Nah no condo I want a house
No townhouse or condo
Just a regular house with lawn/back yard white picket fence :lol
 
anyone have any experiences with modular/manufactured homes? or i should say, experience with living in both site built and modular/manufactured homes

i live in az and looking to buy an acre or two. I dont really want or need a big house since im gonna be utilizing the land for different things. my only concern is that they are dirt cheap compared to a regular house. Ive looked into them and they all swear its the same exact thing as a stick built, but since i like to do all my own handy work, i dont wanna buy a modular/manufactured home and find that i have to tear half the room apart to change some wiring or something
 
need some help
can i use a fha loan to build a house??????
like I'm reading and its just making my head hurt :lol
can you???
and how does it work 8o

maybe...but you are going to have buy the land first, finding a 5K sq ft vacant lot to purchase in the bay.. yeah sounds good :lol

there's gotta be some decent condo's for 4 or less in the bay, maybe even a PUD.

if i still had MLS access i would check.
Nah no condo I want a house
No townhouse or condo
Just a regular house with lawn/back yard white picket fence :lol
come out to solano county fam. There's plenty here for ya lol...
 
Just got the seller's disclosure form for a house that I'm interested in. It stated that the home was last occupied on February 22nd, 2015. I was being nosey and decided to google the signatures on the bottom of the form and found this...

http://www.strunkfh.com/obituary/Shirley-W.-Hill/Easton-PA/1483755

I'm terrified of buying a haunted house 
indifferent.gif
 
anyone have any experiences with modular/manufactured homes? or i should say, experience with living in both site built and modular/manufactured homes

i live in az and looking to buy an acre or two. I dont really want or need a big house since im gonna be utilizing the land for different things. my only concern is that they are dirt cheap compared to a regular house. Ive looked into them and they all swear its the same exact thing as a stick built, but since i like to do all my own handy work, i dont wanna buy a modular/manufactured home and find that i have to tear half the room apart to change some wiring or something

I'd prefer them, but Oklahoma aint really up on that yet except for a few rich ritzy's by the hospital in OKC. They'll put a solar panel on your roof even for like 15 bands. Another kind of recent development is people are buying old shipping containers and there are companies that specialize into refabricating them into homes. If my next house is here in Oklahoma, I want to buy one and make a storm shelter out of it. They cost less, I've seen them go for $2000

1955564


1955565


1955566


1955567
 
container homes, aka the poor mans contemporary home :lol :lol

the last one looks awesome.
 
Last edited:
Went and saw a house that my husband and I really like. It's an old house and still has some knob and tube wiring. Waiting to hear from the listing agent if they put in new electrical and turned off the knob and tube. Anyone have any experience with that kinda old wiring? The house is priced really well and needs some updating so I wouldn't mind putting in new electrical but I just don't know how safe it is. It's stressing me out.

A bro of mine just bought a home with knob and tube wiring. He's redoing all of it. He's an electrician though so it won't be difficult for him.

Are you asking how safe the knob and tuvb
 
Purchased a new development. Going to have my final walk through soon. Some people say that I should take my own home inspector. Do any of your guys have experience with this and what would you recommend?
 
Back
Top Bottom