- 433
- 52
Thinking of throwing my low concords in the washer...good idea or bad? Any suggestions would help. Thanks in advance
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Yeah its the original white insole with the green jumpmanmidsole on the greens is definitely glossy. none of my old stuff has shrank, you sure the insole is the original. I run into all kinds of replacements.
Thinking of throwing my low concords in the washer...good idea or bad? Any suggestions would help. Thanks in advance
Hello. I recently got a pair of usrd Jordan 3 true blues but there are a few signs of wear on them. The "true blue" part of the midsole has some scuffs on it and I was wondering if it was possible to remove or correct it without removing all the paint and painting it over. Also. The Nike Air part of the shoe has some scuffs also. I also wanted to know how you can remove those. Any help is appreciated. I posted some pictures as well.
If I store my sneakers like this is that bad? I do wear them as often as I can.
I realize a little dust is a factor but the closet is climate controlled and no sunlight ever comes in.
I just don’t like the look of the drop down boxes plus my wife isn’t cool with it.
Thanks for your opinions!
It’s pretty much always 68-70 degrees. Central air in Cincinnati OhioCan you give some detail in you method of climate control? Thanks
Help me out. I have a pair of DS military blue 4s and a pair or Mars Blackmon 4s. I’m hesitant to wear either cause I’m afraid they will just crumble. Any preventative measures I can take to decrease this possible outcome or is this a forgone conclusion at this point?
is it dirty or yellow? if dirty either cleaner, if yellow go to sallys beauty supply and buy salon care 40 volume creme. cover the midsole in the solution (use gloves and don't get it in your eyes), wrap with saran wrap and put it in direct sunlight for 30 mins at a time. wash off with water in between. do one half of the shoe at a time.Best product to clean white mid-sole on 1s? Reshoevn8r? Jason Markk? Any help would be appreciated
no, are you doing a full repaint or touch ups? either way you need to seal your job with a finish.Do I still need a duller? If i'm using angelus flate white on the white cement midsoles
is it dirty or yellow? if dirty either cleaner, if yellow go to sallys beauty supply and buy salon care 40 volume creme. cover the midsole in the solution (use gloves and don't get it in your eyes), wrap with saran wrap and put it in direct sunlight for 30 mins at a time. wash off with water in between. do one half of the shoe at a time.
need pics to help, the bubble condition can help identify midsole weakness sometimes. that and a pic of the tag would help
I have more than a few from around those years (a pair of do the right things i wear often) and they are fine. They are slightly foggy on the bubble but firm also when pressing on the midsole. With them being that age you just have to risk it by wearing them and be prepared to swap them if need be. My 01 BC3's needed a swap and my 99 metallic 5's also but both weren't worn much at all and were stored for years.Both are 2006 retros. Air bubbles are a little foggy on both, which I guess is a classic red flag. I pressed down on the outsoles with my fingers and they didn’t cave in and felt firm. Might just wear and see what happens...
I have more than a few from around those years (a pair of do the right things i wear often) and they are fine. They are slightly foggy on the bubble but firm also when pressing on the midsole. With them being that age you just have to risk it by wearing them and be prepared to swap them if need be. My 01 BC3's needed a swap and my 99 metallic 5's also but both weren't worn much at all and were stored for years.
I did it didn't hurt them.Thinking of throwing my low concords in the washer...good idea or bad? Any suggestions would help. Thanks in advance
if you have isopropyl alcohol (99%) use it an qtips and rub with a little pressure in a circle and it should go away. If you don't have the isopropyl try hand sanitizer. Acetone is a last resort as it's a little harsher.Anyone know how to fix this I scraped it on the side of a wall
lol anything with alcohol could work, that one wasn't that bad, it's when it's all ground into the surface that there is lasting damage.Thanks so much man didn’t have any of that but I used Abercrombie and it worked lol