Adidas NMD thread

Thanks aj11fan, All Ready.

And I thought that NMDs are already heaven... So I have got to try those UBs then. :)
 
Guys,

Just a question. For those owning both ultra boost and NMDs, which one for you is more comfortable?

I do have a flat feet so if that matters for the choice of shoe.

I own an NMD and I am so happy with it since me feet doesn't hurt even when wearing it and walking for  long hours.
But also considering an ultraboost in the future.

I do not have a chance to try on an ultraboost since its always sold out. ;)

Thanks!

I'm a wide footer. Usually a size E or W in dress shoes. Comfortwise for me: UB > PB ZG > v2 > NMD
 
 
Guys,

Just a question. For those owning both ultra boost and NMDs, which one for you is more comfortable?

I do have a flat feet so if that matters for the choice of shoe.

I own an NMD and I am so happy with it since me feet doesn't hurt even when wearing it and walking for  long hours.

But also considering an ultraboost in the future.

I do not have a chance to try on an ultraboost since its always sold out. ;)

Thanks!
ultra boost definitely more comfy imho
 
A sizing question, does the tricolour NMD fit a lot bigger than the other PK NMDs like Japan Blacks or Triple Whites? I currently size up half a size from my TTS. A bit of leg room length wise but width is fine.
 
Wow! Thanks so much for the links. Will check them out.

UB sizing same as NMD right?
 
A sizing question, does the tricolour NMD fit a lot bigger than the other PK NMDs like Japan Blacks or Triple Whites? I currently size up half a size from my TTS. A bit of leg room length wise but width is fine.

Wait did I read that right: you go UP 1/2 in prime knit?
Have those and always go DOWN 1/2 in primeknit.
Mesh and xr1 can be tts.
 
Wait did I read that right: you go UP 1/2 in prime knit?
Have those and always go DOWN 1/2 in primeknit.
Mesh and xr1 can be tts.
theres no way anyone sizing up in pk nmds. my tts is 10 and i accidently copped a white trico in 10.5. those ***** looked like a size 12 i swear. even 9.5 in japan greys were too big for me.
 
Wait did I read that right: you go UP 1/2 in prime knit?
Have those and always go DOWN 1/2 in primeknit.
Mesh and xr1 can be tts.
Yea I went up 1/2 in both Japan Black and Triple White PK. Fits really ok tbh, it's just the length that is a little long. With insoles it's pretty much perfect.
 
anybody find any lace replacements for the tricos?

laces are a bit long

and if so from where and what length?
 
Last edited:
My sizing. (prefer loose fit)

Mesh NMDs 9/9.5    prefer 9.5

PK NMDs 8.5/9 prefer 9 but 8.5 is almost the same as 9 (try 8.5 once but let them go cause I have both size).   I was bought 9.5 for my first PKs pair but was to big.

Chukka NMDs 9.5 haven't try 9 but 9 maybe snug fit as mesh.

UBs 1.0 10     bought 9.5/10/10.5 and finally prefer 10. 9.5 was snug as hell around ankle.

UBs 2.0 10 I have triple white and gold medal   10 a little bit snug than 1.0 but its fine.

UBs 3.0 10 have CNY little bit loose than 1.0 but also fine

Kith UB 10 fit like 1.0

City Sock NMDs 8.5/9/9.5    had all these size but right now I have 9 and 9.5 ( wool 9 , black/blue 9.5 )   prefer 9 (fit perfect). It was a little bit snug when first run. But after ran in. 9 is my ideal size. 9.5 is very loose fit after wear it 5-6 times (even I have insole it still a little bit loose).

XRs there are two pattern styles that I have and sizing are not the same. White Men XR 9 is ok. So, I bought Cyan XR on 9 but it was too snug on my right foot. Then for Olive and Triple black I bought 9.5 and they are perfect. (My right foot is a little bit bigger than my left foot. I just know when I measure them.  lol )

So XRs |   White Men XR    9 | Cyan/Olive/TripleBlack XR 9.5

Yeezy 350 V2 Beluga won my first yeezy here but sadly I bought 9 and its snug as hell (if I take out the insole its perfect but don't like to take them out) so I have to let it go. Maybe 9.5 is ok.

V2 Black/Red/Green/Copper 10 still a little bit snug on the top of my feet. Beluga didn't have this problem but snug as hell on two side of the foot. (the widest area of the foot)

V2 Black/White 10/10.5   10.5 is perfect but not sure when they are full ran in. I'm afraid that if it full ran in 10.5 might be big for me like CS. Anyway, this one has the same size as Red/Green/Copper.

My cousin have same foot size as me (by measured the foot). He also have wider foot than me but he like mesh NMDs size 9 and say 9.5 is too big. I can see his toe are pushing the shoe when he wear mesh nmds though.

After all. It depends on personality but the guide can be use in general.

Mesh/CS NMDs TTS   (but I prefer CS - 0.5 )

PK/XR NMDs TTS - 0.5 at lease (but I prefer XR TTS)

UBs TTS + 0.5 at lease

Oh I forgot Pharrel NMDs...  I like 9.5 on Pharrel. 9 is kind of snug on the side but I can live with it.
 
Last edited:
 
Guys,

Just a question. For those owning both ultra boost and NMDs, which one for you is more comfortable?

I do have a flat feet so if that matters for the choice of shoe.

I own an NMD and I am so happy with it since me feet doesn't hurt even when wearing it and walking for  long hours.

But also considering an ultraboost in the future.

I do not have a chance to try on an ultraboost since its always sold out. ;)

Thanks!
Comfort wise:

Yeezy V2 most comfortable

Ultraboost a close second

NMD is OK but like a Camry compared to a Bentley in comfort honestly
 
 
My sizing. (prefer loose fit)

Mesh NMDs 9/9.5    prefer 9.5

PK NMDs 8.5/9 prefer 9 but 8.5 is almost the same as 9 (try 8.5 once but let them go cause I have both size).   I was bought 9.5 for my first PKs pair but was to big.

Chukka NMDs 9.5 haven't try 9 but 9 maybe snug fit as mesh.

UBs 1.0 10     bought 9.5/10/10.5 and finally prefer 10. 9.5 was snug as hell around ankle.

UBs 2.0 10 I have triple white and gold medal   10 a little bit snug than 1.0 but its fine.

UBs 3.0 10 have CNY little bit loose than 1.0 but also fine

Kith UB 10 fit like 1.0

City Sock NMDs 8.5/9/9.5    had all these size but right now I have 9 and 9.5 ( wool 9 , black/blue 9.5 )   prefer 9 (fit perfect). It was a little bit snug when first run. But after ran in. 9 is my ideal size. 9.5 is very loose fit after wear it 5-6 times (even I have insole it still a little bit loose).

XRs there are two pattern styles that I have and sizing are not the same. White Men XR 9 is ok. So, I bought Cyan XR on 9 but it was too snug on my right foot. Then for Olive and Triple black I bought 9.5 and they are perfect. (My right foot is a little bit bigger than my left foot. I just know when I measure them.  lol )

So XRs |   White Men XR    9 | Cyan/Olive/TripleBlack XR 9.5

Yeezy 350 V2 Beluga won my first yeezy here but sadly I bought 9 and its snug as hell (if I take out the insole its perfect but don't like to take them out) so I have to let it go. Maybe 9.5 is ok.

V2 Black/Red/Green/Copper 10 still a little bit snug on the top of my feet. Beluga didn't have this problem but snug as hell on two side of the foot. (the widest area of the foot)

V2 Black/White 10/10.5   10.5 is perfect but not sure when they are full ran in. I'm afraid that if it full ran in 10.5 might be big for me like CS. Anyway, this one has the same size as Red/Green/Copper.

My cousin have same foot size as me (by measured the foot). He also have wider foot than me but he like mesh NMDs size 9 and say 9.5 is too big. I can see his toe are pushing the shoe when he wear mesh nmds though.

After all. It depends on personality but the guide can be use in general.

Mesh/CS NMDs TTS   (but I prefer CS - 0.5 )

PK/XR NMDs TTS - 0.5 at lease (but I prefer XR TTS)

UBs TTS + 0.5 at lease

Oh I forgot Pharrel NMDs...  I like 9.5 on Pharrel. 9 is kind of snug on the side but I can live with it.
Your TTS is a 9 probably. You wear NMDS generally in TTS. 

I have a wider foot so I much prefer wearing almost everything in +1/2 size, including NMD PK, NMD other, Yeezy V2 and UB. 

I wear my TTS in dress shoes, boat shoes etc however. 
 
Back
Top Bottom